Wednesday 20 June 2018

Sewage OR Wastewater Treatment



Wastewater treatment is one of the challenges.Wastewater (liquid waste) from flushing the toilet, bathing, washing sinks and general cleaning goes down the drain and into a pipe, which joins a larger sewer pipe under the road. The larger pipe also joins a major pipe that leads to the treatment center.

STAGE ONE: SCREENING
Screening is the first stage of the wastewater treatment process. Screening removes large objects like, diapers, nappies, sanitary items, cotton buds, face wipes and even broken bottles, bottle tops, plastics and rags that may block or damage equipment. Special equipment is also used to remove grit that gets washed into the sewer.

STAGE TWO: PRIMARY TREATMENT
This involves the separation of organic solid matter from the wastewater. This is done by putting the wastewater into large settlement tanks for the solids to sink to the bottom of the tank. The settled solids are called ‘sludge’. At the bottom of these circular tanks, large scrappers continuously scrape the floor of the tank and push the sludge towards the center where it is pumped away for further treatment. The rest of the water is then moved to the Secondary treatment.

STAGE THREE: SECONDARY TREATMENT
The water, at this stage, is put into large rectangular tanks. These are called aeration lanes. Air is pumped into the water to encourage bacteria to break down the tiny bits of sludge that escaped the sludge scrapping process.

STAGE FOUR: FINAL TREATMENT
Next, the ‘almost’ treated wastewater is passed through a settlement tank. Here, more sludge is formed at the bottom of the tank from the settling of the bacterial action. Again, the sludge is scraped and collected for treatment. The water at this stage is almost free from harmful substances and chemicals. The water is allowed to flow over a wall where it is filtered through a bed of sand to remove any additional particles.